Boiler Installation &Heating Repairs InTimperley

WA15, M33

Postcodes covered in Timperley

Checkatrade verified

Independently reviewed member

£2m insured

Public & employers' liability

Quote in 24 hours

12-month workmanship guarantee

Timperley has grown outwards in fairly distinct layers, and the heating problems we get called out for tend to track those layers closely. Around Timperley Village and the streets off Stockport Road there's a strong run of 1930s semis, many with the original chimney breasts still in place even where the fires themselves went years ago. Further out towards Broadheath and the Baguley edge, the mix shifts to more post-war semis and 1960s-70s detached houses, and closer to Brooklands and the Sale border you start seeing a fair number of newer estate builds mixed in among the older stock.

The 1930s semis around Park Road and Riddings Road are usually well-built but were never designed with modern hot water demand in mind. A lot of these houses still have a hot water cylinder in an airing cupboard fed by a gravity or vented system that's decades old, and the decision homeowners bring to us most often is a straightforward one: stick with the cylinder, or convert to a combi. That decision depends on incoming mains pressure, how many bathrooms the house has ended up with after extensions, and whether anyone's planning a loft conversion that would lose the cylinder cupboard anyway. We talk through the actual numbers rather than pushing one answer.

The 1960s and 70s detached houses on the Broadheath side and towards the Wythenshawe edge often still carry the legacy of an old back boiler unit, even where it was swapped out at some point for a standalone boiler. What's left behind is usually an oversized or wrongly routed flue, redundant pipework behind the fireplace surround, and radiators sized for a system that no longer exists. Sorting that properly means tracing what's actually there rather than just bolting a new boiler onto the old pipe run and hoping it behaves.

Family homes across Timperley have also been extended heavily over the last couple of decades — rear kitchen extensions, loft conversions adding a second bathroom, and side returns that push the heating system further than it was ever specified for. This is where we do a lot of radiator upgrades and additions, because an extra bedroom or a bigger kitchen-diner rarely gets matched with a heat loss recalculation at the time. It's also where underfloor heating comes up most, usually in a new kitchen extension with polished concrete or tiled flooring where a wall-mounted radiator would eat into the layout.

The newer estates around Brooklands and towards Sale tend to bring simpler jobs — combi boilers that are still within or just outside their original warranty, servicing to keep that cover valid, and the odd control or thermostat upgrade rather than a full system rethink. It's a useful contrast to the older Village housing, and having both types on the same patch keeps the work varied rather than repetitive.

Property types we work on here

• 1930s semis (Timperley Village, Park Road, Riddings Road)

  Original airing cupboard cylinders on ageing vented systems. The cylinder-to-combi decision comes down to mains pressure and how many bathrooms the house now has.

• 1960s-70s detached houses (Broadheath, Wythenshawe edge)

  Legacy back boiler pipework and flues left behind after later boiler swaps. Needs tracing properly, not building over.

• Extended family homes

  Kitchen extensions and second bathrooms added without a heat loss recalculation. Radiator upgrades and underfloor heating in extensions are common fixes.

• Newer estates (Brooklands, Sale border)

  Combi boilers still in or just out of warranty. Mostly servicing and control upgrades rather than full system work.

What we're called out for in Timperley

• Cylinder-to-combi conversions for 1930s semis around Timperley Village and Stockport Road
• Tracing and removing redundant back-boiler pipework in older Broadheath and Wythenshawe-edge houses
• Radiator upgrades after kitchen extensions and loft conversions added a second bathroom
• Underfloor heating fitted into new kitchen extensions in place of a wall radiator
• Boiler servicing to protect warranties on newer combis around Brooklands and the Sale border
• Hot water cylinder replacement where an old vented system is being kept rather than converted
• Landlord gas safety certificates for rented family homes across the WA15 postcode
• Emergency call-outs for no heat or no hot water across Timperley and Broadheath

15 minutes from base

A56 or Manchester Road from Stretford, so Timperley call-outs aren't a cross-city trek.

Housing stock we recognise

1930s semis, 1960s-70s detached houses and newer estates — we work all three regularly.

£2m insured

Full public and employers' liability cover on every job.

Checkatrade verified

Independently reviewed, not self-certified.

12-month guarantee

Workmanship covered for a year after the job's finished.

Free written quotes

Delivered within 24 hours, with no obligation attached.

Ageing vented cylinder systems

Original airing cupboard cylinders in Village semis that are still working but slow to recover, prompting the cylinder-versus-combi conversation.

Back-boiler legacy pipework

Redundant flues and pipe runs left behind after an old back boiler unit was swapped out on Broadheath and Wythenshawe-edge houses, still affecting how a newer boiler performs.

Radiators outgrown by extensions

Kitchen extensions and loft conversions adding floor area and a second bathroom without the radiators or boiler being resized to match.

Wrong flooring for a radiator

New kitchen extensions with tiled or polished concrete floors where underfloor heating suits the layout far better than a wall-mounted radiator.

Uneven heat across extended homes

Mixed pipe diameters and radiator ages after multiple rounds of building work, usually solved with a proper flush and balance.

Delayed landlord paperwork

Rented family homes near Brooklands and the estates where a gas safety certificate wasn't booked early enough before a tenancy changeover.

You call or send the job

Tell us the property, the postcode and what's happening. No call centre — you speak to the engineer who'll do the work.

Survey at your property

We look at the system as it stands: boiler, pipework, cylinder, radiators, gas supply and flue route.

Written quote within 24 hours

Itemised, fixed and explained. You know what's included and what it costs before anyone lifts a floorboard.

The work, done tidily

Dust sheets down, floors protected, gas work signed off correctly and the house left clean each evening.

Handover and guarantee

System balanced, controls demonstrated, paperwork issued and 12 months' workmanship guarantee behind it.